GNSS NEWDI M3

Description

GNSS NEWDI M3

NEWDI M3 adalah GNSS berperforma tinggi dan ringkas dengan fitur unik dan tak tertandingi dalam kategorinya. M3 memiliki fitur multi-rasi 432 saluran papan GNSS dan mendukung GPS, GLONASS, BEIDOU, GALILEO, termasuk koreksi L-Band.
Antena internal yang unik menggabungkan modul terintegrasi GNSS, Bluetooth dan Wi-Fi untuk mengoptimalkan ruang dan meningkatkan kinerja. Teknologi ini memberikan pemantauan sinyal yang lebih kuat dan lebih bersih, yang berarti hasil yang belum pernah terjadi sebelumnya. Dirancang untuk digunakan sepanjang hari dalam aplikasi survei, M3 mencakup beberapa fitur: Sistem Operasi Linux, antarmuka WEB UI, modem radio UHF, kapasitas baterai tinggi dan sertifikasi IP67.

MULTI CONSTELLATION
Newdi M3 with its 432 channels, provides an excellent on board real time navigation solution with high accuracy. All GNSS signals (GPS, GLONASS, BEIDOU and GALILEO) are included, no additional cost
Electronic Bubble
Equipped with E-bubble in filed RTK software Landstar 7, Newdi M3 allows rover to be levelled from software easily
WEB UI CONTROL
To initialize, manage, monitor the settings of the receiver and to download data using portable or PC, smartphone or tablet with Wi-Fi capability
2*3400mAh BATTERY CAPACITY
Newdi M3 is delivered with 2*3400mAh large capacity lithium battery that gives you up to 10 hours working

GNSS Characteristics
• 432 channels with all in view simultaneously tracked
satellite signals
– GPS: L1, L2, L5
– GLONASS: L1, L2
– BDS: B1, B2, B3
– Galileo: E1, E5a, E5b
– QZSS: L1, L2, L5
– SBAS: L1
• Advanced multipath mitigation technology
• Low noise carrier phase measurement

GNSS Accuracies (1)
• Real Time Kinematics (RTK):
– Horizontal: 8 mm + 1 ppm RMS
– Vertical: 15 mm + 1 ppm RMS
– Initialization Time: < 10 s
– Initialization Reliability: > 99.9%
• Post-processing Static:(Static)
– Horizontal: 3 mm + 0.5 ppm RMS
– Vertical: 5 mm + 0.5 ppm RMS
• Post-processing Kinematics(PPK)
– Horizontal: 3 mm + 1 ppm RMS
– Vertical: 5 mm + 1 ppm RMS
• Raw data updating: up to 10Hz

Communications
• Integrated 3G network modem
• Wi-Fi: 802.11 b/g/n, access mode, Wi-Fi station support
• UHF Radio:
–Protected TNC Female
– Standard Internal Rx/Tx: 410 MHz to 470 MHz
–Baud rate: up to 19200
–Transmit Power: 0.5W to 2 W
–Protocol: CHC, Trimble, Pacific Crest
–Range: 5 km under optimal conditions
– External Tx DL6: 5 W to 28 W adjustable
• Protocols:
– RTCM2.x, RTCM3.x, CMR
– NMEA 0183 output
–HCN, HRC RINEX 2.11, 3.02
• Ports:
– 1 x 7-pin LEMO port (external power, USB data
Download, USB update, RS-232)
–1 x USB2.0 port
–1 x UHF antenna port
• Data Storage: 8 GB high speed memory

Physical
• Size: 13.7cm×13.7cm×12.0cm
• Weight: 1.37 kg with battery
• Environment
– Operating: -45°C to +75°C (-49°F to +167°F)
– Storage: -50°C to +85°C (-58°F to +185°F)
• Humidity: 100% condensation
• Dust and Water Proof: IP67
• Shock and Vibration: 2 m (6.56 ft) fall onto concrete
•Tilt sensor: Ebubble
•Front panel: 6 LED indicates

Electrical
• Power Consumption: 4.17 W (depending on user settings)
• Li-ion Battery Capacity: 2*3400mah, 7.4V
• Operating Time(2):
–RTK UHF base: 5h-7h
–RTK Rover: 10h
–Static: 12h
• External Power: 9 V DC to 36 V DC
Software (optional)
• LandStar 7 Android field data collection software